CORPORATE HEADQUARTERS

ROOFING DIVISION

Favorite Links:

Polyfoam Products, Inc. - Polyset Spec Writer

Welcome to the innovative Polyfoam online CSI spec writing tool. It's straightforward and easy to use. Simply select the options on the form below that accurately describe your project and then click the download button for the format you want. You will be prompted to save the file on your computer. It will be editable should you need to make any changes.

General:

Quality Assurance:

Mock-Up:

Mock-up may not remain as part of Work.
Accepted mock-up may remain as part of Work.

Products:

Components:

Roof Tile - Clay or Concrete
Metal Flashing
Underlayment:

Organic Saturated Type II, No. 30, complying with ASTM D 226
Asphalt Saturated Type, No. 40 coated base sheet, complying with ASTM D 2626
Mineral Surfaced, Type I, No. 90, complying with ASTM D 249
Modified bitumen single ply membrane, minimum 40 mils (1.02 mm) thick.
Modified bitumen, self adhere membrane, minimum 40 mils (1.02 mm) thick
Granular Surface SBS modified bitumen membrane, minimum 40 mils (1.02 mm) thick at selvage edge

Underlayment Fasteners:

Round Headed Roofing Nail

Nail Caps

Cap Nails

Tile Fasteners:

Nails

Screw Fasteners:

Storm Clips

Two Component Polyurethane Roof Tile Adhesive: PolyPro AH160
PolyPro AH160 two-component polyurethane foam with the following properties:

Density conforming to ASTM D 1622M
Compressive strength conforming to ASTM D 1621
Tensile Strength conforming to ASTM D 1623
Water absorption conforming to ASTM D 2842
Moisture Vapor Transmission conforming to ASTM E 96
Dimensional Stability conforming to ASTM D 2126
Closed Cell Content conforming to ASTM D 2856
Surface Burning Characteristics conforming to ASTM E 84
Fire Tests of Roof Covering conforming to ASTM E 108, Class A

Conforms to:

Miami-Dade: NOA No. 01-0521.02
SBCCI Standard for Hurricane Resistant Residential Construction, SBCCI Evaluation Report 9822B
ICBO for One and Two Family Dwellings, ICBO ER-5595
Florida Building Code, Product Approval #FL830
Texas Department of Insurance Evaluation, Product Evaluation RC-22

Tile Installation: PolyPro AH160 Two-component Polyurethane Roof Tile Adhesive:

Slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Slopes above 6:12 and including 7:12: Fasten eave course and every third tile in every fifth course with one fastener
Slopes above 6:12 and including 7:12: Fasten eave course and every third tile in every fifth course with one fastener
Slopes Above 7:12:

Two piece barrel tile with slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Two piece barrel tile with slopes above 6:12 up to and including 7:12: Fasten pan tiles of the eave course and every pan tile in every fifth course with one fastener
Two piece barrel tile with slopes above 7:12: Fasten every cover and pan tile with one fastener
Two piece barrel tile with slopes above 7:12: The use of treated wood stringers under cover tile is acceptable

One Component Polyurethane Roof Tile Adhesive: Polyset ONE
PolySet ONE, one-component polyurethane foam with the following properties

Density conforming to ASTM D 1622
Compressive strength conforming to ASTM D 1621
Tensile Strength conforming to ASTM D 1623
Water absorption conforming to ASTM D 2842
Moisture Vapor Transmission conforming to ASTM E 96
Dimensional Stability conforming to ASTM D 2126
Closed Cell Content conforming to ASTM D 2856
Surface Burning Characteristics conforming to ASTM E 84
Fire Tests of Roof Covering conforming to ASTM E 108, Class A

Conforms to:

Miami-Dade:Conforming to ASTM D 4586, Type II, non-asbestos, non-running type
Florida Building Code, Product Approval #FL4180

Tile Installation - Polyset ONE one-component Polyurethane Roof Tile Adhesive:

Slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Slopes Above 7:12:

Two piece barrel tile with slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Two piece barrel tile with slopes above 6:12 up to and including 7:12: Fasten pan tiles of the eave course and every pan tile in every fifth course with one fastener
Two piece barrel tile with slopes above 7:12: Fasten every cover and pan tile with one fastener
Two piece barrel tile with slopes above 7:12: The use of treated wood stringers under cover tile is acceptable

Two Part Polyurethane Roof Tile Adhesive and Sealer: Hip and Ridge Adhesive and Weatherblock:
Two-component polyurethane foam with the following properties:

Density conforming to ASTM D 1622
Compressive strength conforming to ASTM D 1621
Tensile Strength conforming to ASTM D 1623
Water absorption conforming to ASTM D 2842
Moisture Vapor Transmission conforming to ASTM E 96
Dimensional Stability conforming to ASTM D 2126
Closed Cell Content conforming to ASTM D 2856
Surface Burning Characteristics conforming to ASTM E 84
Fire Tests of Roof Covering conforming to ASTM E 108, Class A
Conforms to: Florida Building Code - TAS 100 "Test Procedure for Wind and Wind Driven Resistance of Discontinuous Roof Systems".

Asphaltic Adhesive:

Conforming to ASTM D 4586, Type II, non-asbestos, non-running type
Modified Bitumen mastic conforming to ASTM D 3019, Type II

Execution:

Installation:

General: Install in accordance with manufacturer's instructions and the following